Compare instruments
Up to 4 instruments of the same type, every published specification side by side. Rows where the values differ are tinted. A blank cell means the manufacturer does not publish that value.
Comparing 2 handheld sound level meters. Back to the category table.
| Specification | HD2010UCDelta OHM (Senseca) | Quest Sound Examiner SE-400 seriesTSI Quest |
|---|---|---|
| Status | Current | Current |
| Verified on | ||
| Standards and class | ||
| Standards (differs) | IEC 61672-1:2013 class 1 or class 2, group X, IEC 61672-1:2002, IEC 60651:2001 and IEC 60804:2000 class 1 or 2 | IEC 61672-1:2002 (class 1 or class 2 by model), ANSI S1.43-1997 (R2007), ANSI S1.4-1983 (R2006), EN/IEC 60079-0 and 60079-11 (IS models) |
| Pattern approvals (differs) | I.N.RI.M. approval certificate no. 07-0124-02 (IEC 61672-1:2002) | — |
| Measurement | ||
| Channels | 1 | 1 |
| Measurement range (differs) | 30 dBA to 143 dB peak | 30 to 140 dBA (single range) |
| Linearity range (differs) | 80 dB | 110 dBA total dynamic range |
| Peak range (differs) | up to 143 dB peak | Max peak level 143 dBA (sampled peak) |
| Frequency weightings | A, C, Z | A, C, Z |
| Time weightings (differs) | F, S, I | F, S |
| Simultaneous weightings (differs) | Yes | — |
| Parameters (differs) | SPL, Leq, LeqI, SEL, LEP,d, Lmax, Lmin, Lpeak, Dose, LN (three selectable L1 to L99; full L1 to L99 with HD2010.O2) | SPL, Lmax, Lmin, Lpeak, Leq/Lavg, LE, elapsed time |
| Dosimetry (differs) | Yes | — |
| Exchange rates (differs) | — | 3 dB, 4 dB, 5 dB |
| Intrinsically safe marking (differs) | — | IS models: IECEx certificate 13.0006X, ATEX certificate 1210031X (EN/IEC 60079-0, 60079-11) |
| Analysis | ||
| Octave bands | None | None |
| Reverberation time (differs) | — | No |
| Building acoustics (differs) | — | No |
| Audio recording | No | No |
| Logging and data | ||
| Shortest logging interval (differs) | 125 ms (one profile parameter, with HD2010.O2); report parameters 1 s to 1 h | 1 s |
| Memory (differs) | 8 MB internal flash, more than 500 records; SD card up to 2 GB via optional HD2010MC reader (requires HD2010.O2) | 2 MB internal (34 days at 1-minute logging) |
| Hardware | ||
| Microphone (differs) | UC52/1 (class 1) or UC52 (class 2), 1/2" prepolarised free-field condenser | Class 1: QE4936; Class 2: QE7052; 1/2" (13.2 mm) microphones |
| Detachable preamplifier | Yes | Yes |
| Outdoor microphone kit (differs) | HDWME outdoor microphone protection; heated preamplifier HD2010PNE2W (option HD2010.OE) | — |
| Display (differs) | Backlit graphic LCD, 128 x 64 | — |
| Battery (differs) | NiMH 4.8 V / 2.1 Ah rechargeable pack; external 5 to 24 V DC | Lithium polymer rechargeable, 2500 mAh (1500 mAh on IS models), USB charged |
| Battery life (differs) | — | 18 h |
| Weight (differs) | 740 g | 367.5 g |
| Dimensions (mm) (differs) | 445 x 100 x 50 (with preamplifier) | 284 x 71 x 33 (with preamp and microphone) |
| IP rating (differs) | IP64 | — |
| Operating temperature (°C) | -10 to 50 | -10 to 50 |
| Connectivity and software | ||
| Connectivity (differs) | USB 1.1, RS-232C (300 to 115200 baud), AC line output (3.5 mm), DC output (2.5 mm), external power input | USB 2.0 (mini-USB), RS-232 (not on IS models), AC/DC output 3.5 mm (not on IS models) |
| Software (differs) | Noise Studio 1.0 Basic, NS1 Workers Protection, NS-ENS Environmental Noise Studio (requires HD2010.O2) | Detection Management Software (DMS) |