Larson Davis · Spark · Noise dosimeter
Spark 706RC
DiscontinuedPersonal noise dosimeter with keypad and display from the Spark family, able to run standalone or act as remote control for the display-less 703+ and 705+ units. Four simultaneous dose set-ups, 4 MB memory, AA batteries and an infrared interface to Blaze software. No longer in the manufacturer's current dosimeter range, which lists the Spartan 730 and 730IS.
Specifications verified on .
- Type
- Noise dosimeter
- Channels
- 1
- Octave bands
- None
- Connectivity
- infrared (DVX010 USB-to-IR module)
- Battery life
- 100 h
Specifications
As published by Larson Davis. Fields the manufacturer does not publish are omitted rather than estimated.
| Specification | Value |
|---|---|
| Channels | 1 |
| Measurement range | 40 to 143 dB rms in four ranges |
| Peak range | 80 to 146 dB in four ranges |
| Frequency weightings | A, C |
| Time weightings | F, S |
| Parameters | Leq, Lmax, Lpeak, Lmin, four time-weighted averages, Ln (1 to 99), Dose, projected Dose, SE (Pa2h), SEA |
| Dosimetry | Yes |
| Exchange rates | 3 dB, 4 dB, 5 dB, 6 dB |
| Specification | Value |
|---|---|
| Octave bands | None |
| Reverberation time | No |
| Building acoustics | No |
| Audio recording | No |
| Specification | Value |
|---|---|
| Shortest logging interval | 1 s |
| Memory | 4 MB non-volatile |
| Specification | Value |
|---|---|
| Microphone | 3/8" (10.6 mm) MPR001 integrated microphone/preamplifier on 1 m cable |
| Detachable preamplifier | No |
| Display | LCD with backlight (706RC only) |
| Battery | 2 x AA alkaline, NiCd or NiMH |
| Battery life | 100 h |
| Specification | Value |
|---|---|
| Connectivity | infrared (DVX010 USB-to-IR module) |
| Software | Blaze |
Variants
| Variant | Difference |
|---|---|
| 706RC | keypad and display, two AA cells |
| 703+ | no keypad or display, two AA cells, lightweight housing |
| 705+ | no keypad or display, one AA cell, extruded metal housing |
Where this data comes from
| Kind | Document | Accessed |
|---|---|---|
| Manual | Spark Noise Dosimeters and Blaze Software Technical Reference Manual I706.01 Rev J (2013) | |
| Product page | Noise dosimeter support (current range lists Spartan 730 and 730IS only) |
Verified on . Only the manufacturer’s own published material is used; distributor pages are not sources.
Spec out of date? Tell us (reference larson-davis-spark-706rc).
Verified owner reviews
Reviews from people who own and use this instrument, each checked against a serial number by a person.
Opens in November 2026. Own this instrument? Register your interest.
Known issues and firmware notes
Hardware and firmware problems reported by owners, with the firmware version concerned and any manufacturer response.
Opens in November 2026. Own this instrument? Register your interest.
Feature requests
Functions owners would like to see in a firmware update or a successor model.
Opens in November 2026. Own this instrument? Register your interest.
Read next
- How to choose a noise dosimeter · IEC 61252, exchange rates, criterion levels, badge vs cable, intrinsic safety, logging and audio.
- Sound level meter calibration and verification · Field calibration vs laboratory calibration, IEC 61672-3, ISO 17025, intervals, reading a certificate.
Related instruments
More from Larson Davis
- Spartan 730 · Larson Davis
- Spartan 730IS · Larson Davis
- Model 831 · Larson Davis · Class 1Discontinued
- NMS-SE 831C · Larson Davis · Class 1
Other noise dosimeters
- Quest NoisePro DLX (NP-DLX) · TSI QuestDiscontinued
- Quest Edge 4+ (EG4P) · TSI Quest
- Brüel & Kjær 4448 · HBK (Brüel & Kjær)Discontinued
- Quest Edge 5 (EG5) · TSI QuestDiscontinued