TSI Quest · SoundPro · Handheld sound level meter
Quest SoundPro SE/DL
CurrentHand-held sound level meter and analyser offered in Class 1 and Class 2 versions, with two virtual meters running at once and optional real-time 1/1 and 1/3-octave filters. SE models store summary data; DL models add time-history logging. Used for occupational and environmental noise surveys; an outdoor measuring kit (SP-OMS) converts it for unattended use.
Specifications verified on .
- Type
- Handheld sound level meter
- Channels
- 1
- Octave bands
- 1/1 and 1/3
- Connectivity
- USB 2.0 (mini-USB), RS-232 (10-pin auxiliary connector), AC/DC output (3.5 mm)
- Weight
- 540 g
- Battery life
- 10 h
Specifications
As published by TSI Quest. Fields the manufacturer does not publish are omitted rather than estimated.
| Specification | Value |
|---|---|
| Standards | EN/IEC 61672-1:2002 (class 1 or class 2 by model), ANSI S1.4 (R2006), ANSI S1.43 (R2007), EN/IEC 61260 (2001), ANSI S1.11 (R2009) |
| Specification | Value |
|---|---|
| Channels | 1 |
| Measurement range | 0 to 140 dB overall, over 8 individual ranges of 90 dB |
| Linearity range | 120 dB+ (A-weighted) total dynamic measurement range |
| Peak range | Up to 143 dB with BK4936 microphone |
| Frequency range | 1/1 octave filters 16 Hz to 16 kHz; 1/3 octave filters 12.5 Hz to 20 kHz |
| Frequency weightings | A, C, Z |
| Time weightings | F, S, I |
| Parameters | SPL, Lmax, Lmin, Lpeak, Leq/Lavg, SEL, LN (L1 to L99 selectable), TWA, Dose, Ldn, CNEL |
| Dosimetry | Yes |
| Exchange rates | 3 dB, 4 dB, 5 dB, 6 dB |
| Specification | Value |
|---|---|
| Octave bands | 1/1 and 1/3 |
| Reverberation time | Yes |
| Speech intelligibility | STIPA (firmware OPTION-1, Acoustic Spectral Curves & Speech Intelligibility) |
| Specification | Value |
|---|---|
| Shortest logging interval | 1 s (DL models; 11 selectable intervals to 60 min) |
| Memory | SD card, 32 MB to 32 GB (card included) |
| Specification | Value |
|---|---|
| Microphone | Class 1: BK4936 1/2"; Class 2: QE7052 1/2"; preamp accepts 1/2" (13.2 mm) microphones; 1/4" and 1" optional |
| Detachable preamplifier | Yes |
| Outdoor microphone kit | SP-OMS Outdoor Measuring System |
| Display | Transflective 128 x 64 dot-matrix LCD with backlight |
| Battery | 4 x AA alkaline (NiMH optional) |
| Battery life | 10 h |
| Weight | 540 g |
| Dimensions (mm) | 79 x 282 x 41 (3.1 x 11.1 x 1.6 in, with preamp and microphone) |
| Operating temperature (°C) | -10 to 50 |
| Specification | Value |
|---|---|
| Connectivity | USB 2.0 (mini-USB), RS-232 (10-pin auxiliary connector), AC/DC output (3.5 mm) |
| Software | Detection Management Software (DMS) |
Variants
| Variant | Difference |
|---|---|
| SP-SE-1 / SP-SE-1-1/1 / SP-SE-1-1/3 | Class/Type 1 with BK4936 microphone; summary logging only; none, 1/1, or 1/1 and 1/3 octave real-time analysis |
| SP-SE-2 / SP-SE-2-1/1 / SP-SE-2-1/3 | Class/Type 2 with QE7052 microphone; summary logging only; none, 1/1, or 1/1 and 1/3 octave |
| SP-DL-1 / SP-DL-1-1/1 / SP-DL-1-1/3 | Class/Type 1; adds time-history data logging at 1 s to 60 min intervals |
| SP-DL-2 / SP-DL-2-1/1 / SP-DL-2-1/3 | Class/Type 2; adds time-history data logging at 1 s to 60 min intervals |
Where this data comes from
| Kind | Document | Accessed |
|---|---|---|
| Product page | Quest SoundPro SE-DL Sound Level Meters | |
| Datasheet | SoundPro Sound Level Meters SE/DL Series spec sheet (A4, P/N 5002177) |
Verified on . Only the manufacturer’s own published material is used; distributor pages are not sources.
Spec out of date? Tell us (reference tsi-quest-soundpro-se-dl).
Verified owner reviews
Reviews from people who own and use this instrument, each checked against a serial number by a person.
Opens in November 2026. Own this instrument? Register your interest.
Known issues and firmware notes
Hardware and firmware problems reported by owners, with the firmware version concerned and any manufacturer response.
Opens in November 2026. Own this instrument? Register your interest.
Feature requests
Functions owners would like to see in a firmware update or a successor model.
Opens in November 2026. Own this instrument? Register your interest.
Read next
- How to choose a sound level meter · Class 1 vs class 2, integrating vs non-integrating, parameters by application, options and licences, calibration.
- Class 1 vs class 2 sound level meters · IEC 61672-1 tolerances, what the classes do and do not say, and where each is typically required.
Related instruments
More from TSI Quest
- OmniTrak Sound Level Meter Class 2 Module (7591-09) · TSI Quest · Class 2
- Quest Sound Detector SD-200 · TSI Quest · Class 2
- Quest Sound Examiner SE-400 series · TSI Quest
- Quest Edge 4+ (EG4P) · TSI Quest
Other handheld sound level meters
- HD2010UC · Delta OHM (Senseca)
- CEL-24x · Casella
- HD2010UC/A · Delta OHM (Senseca)Discontinued