ACT-400 Acoustic Connect Terminal vs Bedrock BOMK00 Outdoor Monitoring Kit
Every specification ACOEM (01dB) and Bedrock publish for these two instruments, side by side. Rows where the values differ are tinted. A blank cell means that manufacturer does not publish the figure, which is itself worth knowing. Nothing here is written by either manufacturer.
| Specification | ACT-400 Acoustic Connect TerminalACOEM (01dB) | Bedrock BOMK00 Outdoor Monitoring KitBedrock |
|---|---|---|
| Status | Current | Current |
| Verified on | ||
| Standards and class | ||
| IEC 61672-1 class | Class 1 | Class 1 |
| Standards (differs) | IEC 61672-1 class 1 | IEC 61672 group X class 1 |
| Measurement | ||
| Channels (differs) | 1 | 2 |
| Measurement range (differs) | 20 to 138 dB (118 dB dynamic range) | — |
| Frequency weightings (differs) | — | A, C, Z |
| Time weightings (differs) | — | F, S, I |
| Parameters (differs) | — | Leq, SEL, Lpeak, percentile levels, RT60, STI, NR/NC/PNC/NCB/RC curves |
| Analysis | ||
| Octave bands (differs) | — | 1/1 and 1/3 |
| Octave band filter class (differs) | — | class 1 (IEC 61260); 1/6 and 1/12 octave also available |
| FFT (differs) | — | 800, 1600 or 3200 lines |
| Reverberation time (differs) | — | Yes |
| Building acoustics (differs) | — | Yes |
| Speech intelligibility (differs) | — | STIPA and Full STI |
| Audio recording (differs) | — | Yes |
| Logging and data | ||
| Memory (differs) | internal SD card (capacity not stated) | 30 GB internal (AM100) |
| Hardware | ||
| Microphone (differs) | integrated (model not stated) | BAMT1-MP201 1/2" omnidirectional free-field, class 1, XLR 48 V phantom |
| Detachable preamplifier (differs) | — | Yes |
| Outdoor microphone kit (differs) | integrated weatherproof housing | weatherproof 1/2" outdoor microphone housing on 3 m XLR extension (included) |
| Display (differs) | none | capacitive touch TFT, 800 x 480 (AM100) |
| Battery (differs) | internal back-up battery | external LiFePO4, 22.4 V nominal, typ. 32 Ah, swappable; AM100 internal NiMH pack |
| External power (differs) | mains | 200 W mains adapter; solar panel compatible; external LiFePO4 battery (recharge 4 to 4.5 h from mains) |
| Autonomy on internal power (differs) | — | 6 days |
| Dimensions (mm) (differs) | — | case approx. 590 x 470 x 280 |
| Connectivity and software | ||
| Connectivity (differs) | Ethernet (RJ45), 4G modem, GPS | WiFi, LAN, Bluetooth, USB |
| Remote control (differs) | Cadence platform; open platforms via push data | remote operation over USB, WiFi or Bluetooth; remote API |
| Software (differs) | Cadence | Bedrock Elite Analyzer, Bedrock Studio |
The instruments on their own
- ACT-400 Acoustic Connect Terminal — full record, sources and owner reviews
- Bedrock BOMK00 Outdoor Monitoring Kit — full record, sources and owner reviews
Other comparisons
- ACT-400 Acoustic Connect Terminal vs Guardian2
- Bedrock BOMK00 Outdoor Monitoring Kit vs Guardian2
- ACT-400 Acoustic Connect Terminal vs CESVA TA120
- ACT-400 Acoustic Connect Terminal vs Outdoor Environmental Noise Kit (CK:671B / CK:675B / CK:681B / CK:685B)
- Bedrock BOMK00 Outdoor Monitoring Kit vs Outdoor Environmental Noise Kit (CK:671B / CK:675B / CK:681B / CK:685B)
- ACT-400 Acoustic Connect Terminal vs Watch
- Bedrock BOMK00 Outdoor Monitoring Kit vs Watch
- ACT-400 Acoustic Connect Terminal vs Svantek SV 303
Want a different combination, or more than two at once? Build your own comparison from any instruments of the same type.