BSWA 308 vs Optimus+ Environmental Sound Level Meter
Every specification BSWA Technology and Cirrus Research publish for these two instruments, side by side. Rows where the values differ are tinted. A blank cell means that manufacturer does not publish the figure, which is itself worth knowing. Nothing here is written by either manufacturer.
| Specification | BSWA 308BSWA Technology | Optimus+ Environmental Sound Level MeterCirrus Research |
|---|---|---|
| Status | Current | Current |
| Verified on | ||
| Standards and class | ||
| IEC 61672-1 class | Class 1 | Class 1 |
| Standards (differs) | GB/T 3785.1-2023, IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013 class 1, ANSI S1.4-1983, ANSI S1.43-1997, IEC 61260-1:2014, ANSI S1.11-2004, GB/T 3241.1-2025 | IEC 61672-1:2013 class 1 or class 2, IEC 61260 and ANSI S1.11-2004 (1:1 and 1:3 octave filters), IEC 60651, IEC 60804, ANSI S1.4, ANSI S1.43, DIN 45657 |
| Pattern approvals (differs) | — | PTB (class 1), LNE (class 1) |
| Recommended calibration interval (differs) | — | 12 months |
| Measurement | ||
| Channels | 1 | 1 |
| Measurement range (differs) | Single range, 123 dB dynamic range; upper limit 136 dB rms with 40 mV/Pa microphone (154 dB(A) with a 5 mV/Pa microphone) | 20 to 140 dB, single range |
| Linearity range (differs) | 22 dB(A) to 136 dB | — |
| Peak range (differs) | 47 to 139 dB (C) | — |
| Frequency range (differs) | 10 Hz to 20 kHz | 6.3 Hz to 20 kHz (1:3 octave bands measured; 12.5 Hz to 20 kHz displayed) |
| Frequency weightings (differs) | A, B, C, Z | A, C, Z |
| Time weightings | F, S, I | F, S, I |
| Simultaneous weightings | Yes | Yes |
| Parameters (differs) | SPL, Leq, Leq1s, LIeq, SD, SEL, E, Lmax, Lmin, Lpeak, Lday, Levening, Lnight, Ldn, Lden, LN (1 to 99) | LXeq, LXYmax, LXYmin, LCpeak, LZpeak, LXE, Ln statistics, Lden, Leq LF (20 to 200 Hz), tonal noise detection (C models) |
| Analysis | ||
| Octave bands | 1/1 and 1/3 | 1/1 and 1/3 |
| Octave band filter class (differs) | class 1 | — |
| Audio recording (differs) | — | Yes |
| Logging and data | ||
| Shortest logging interval (differs) | 0.1 s | 10 ms |
| Memory (differs) | 8 GB microSD | 8 GB standard; 32 GB factory option |
| Hardware | ||
| Microphone (differs) | MPA231T 1/2" prepolarised, class 1, 40 mV/Pa (BSWA 309: MPA309T, class 2) | class 1: MK:224 1/2" pre-polarised; class 2: MK:216 pre-polarised |
| Detachable preamplifier (differs) | — | Yes |
| Outdoor microphone kit (differs) | — | Outdoor Environmental Noise Kit (CK:67x/68x) with MK:172 outdoor microphone |
| Display (differs) | 160 x 160 LCD, white backlight | high-resolution OLED with ambient light sensor and illuminated keypad |
| Battery (differs) | 4 x AA (LR6) alkaline | 4 x AA alkaline or lithium |
| Battery life (differs) | 10 h | 12 h |
| External power (differs) | 7 to 14 V DC, 500 mA, or USB 5 V, 1 A | 5 to 15 V DC via ZL:171 cable |
| Weight (differs) | 620 g | 300 g |
| Dimensions (mm) (differs) | 70 x 300 x 36 | 283 x 65 x 30 |
| Operating temperature (°C) | -10 to 50 | -10 to 50 |
| Connectivity and software | ||
| Connectivity (differs) | USB, RS-232, AC output, DC output, microSD, GPS module (optional) | USB type B, Bluetooth Low Energy, AC/DC output, GPS (GPS model) |
| Remote control (differs) | — | MyCirrus mobile apps via Bluetooth; remote access via Outdoor Kit modem |
| Software (differs) | VA-SLM | NoiseTools, MyCirrus app |
The instruments on their own
- BSWA 308 — full record, sources and owner reviews
- Optimus+ Environmental Sound Level Meter — full record, sources and owner reviews
Other comparisons
- FUSION vs BSWA 308
- BSWA 308 vs B&K 2245
- Optimus+ Environmental Sound Level Meter vs B&K 2245
- BSWA 308 vs Tango Plus
- Optimus+ Environmental Sound Level Meter vs Tango Plus
- BSWA 308 vs TES-1358EL
- Aihua AWA5662 vs Optimus+ Environmental Sound Level Meter
- Bedrock AM100 vs Optimus+ Environmental Sound Level Meter
Want a different combination, or more than two at once? Build your own comparison from any instruments of the same type.