dBadge2 vs NoiseBadge (Model 22)
Every specification Casella and Pulsar Instruments publish for these two instruments, side by side. Rows where the values differ are tinted. A blank cell means that manufacturer does not publish the figure, which is itself worth knowing. Nothing here is written by either manufacturer.
| Specification | dBadge2Casella | NoiseBadge (Model 22)Pulsar Instruments |
|---|---|---|
| Status | Current | Current |
| Verified on | ||
| Manufacturer list price | GBP 510 | |
| Standards and class | ||
| Standards (differs) | IEC 61252 Ed. 1.1b:2002, ANSI S1.25-1991 (R2007), IEC 61260:2014 class 2 (Pro filters), ANSI/ASA S1.11-2014 class 2 (Pro filters) | IEC 61252:1993, ANSI S1.25:1991, IEC 60942:2001 class 2 (reader calibrator) |
| Recommended calibration interval (differs) | — | 12 months |
| Measurement | ||
| Channels (differs) | 1 | 2 |
| Measurement range (differs) | 54.0 to 140.3 dB(A) RMS, dynamic range 96 dB | 70 to 130 dB(A) RMS |
| Linearity range (differs) | 54.0 to 140.3 dB(A) | — |
| Peak range (differs) | 90.0 to 143.3 dB (C or Z) | 120 to 140 dB(C) |
| Frequency weightings (differs) | A, C, Z | A, C |
| Time weightings (differs) | F, S, I | S |
| Parameters (differs) | Lavg, TWA(8h), projected TWA, Dose, projected Dose, LAeq, LCeq, LAIeq, LEP,d / LEX,8h, LApk, LCpk, LZpk, LAFmax, LASmax, LAImax, Pa2h, LC-LA (HML), Lpk counts > 135/137/140 dB, LAE, Motion Index | LAeq, LEP,d / LEX,8h, LAE, LCpeak, Lavg, TWA, Dose %, estimated Dose %, exposure Pa2h, 115 dB(A) exceedance |
| Dosimetry | Yes | Yes |
| Exchange rates (differs) | 3 dB, 5 dB | 3 dB, 4 dB, 5 dB |
| Intrinsically safe marking (differs) | ATEX/IECEx: I M1; II 1GD; Ex ia I Ma; Ex ia IIC T4 (135 °C) Ga; Ex ia IIIC T135 °C Da; Ta = -20 °C to +45 °C (IS models) | — |
| Analysis | ||
| Octave bands (differs) | 1/1 | None |
| Octave band filter class (differs) | class 2 (IEC 61260:2014), 9 bands 31.5 Hz to 8 kHz (Pro) | — |
| Reverberation time | No | No |
| Building acoustics | No | No |
| Audio recording (differs) | Yes | No |
| Logging and data | ||
| Shortest logging interval (differs) | 1 s | 1 min |
| Memory (differs) | internal microSD, 300 h of run data including 1 s profile; up to 90 min event audio | reader stores up to 93 eight-hour, 64 twelve-hour or 33 twenty-four-hour measurements |
| Hardware | ||
| Microphone (differs) | 1/2" CEL-252, 31.6 mV/Pa, type 2 | removable prepolarised electret, 1/2" class 2 |
| Detachable preamplifier | No | No |
| Display (differs) | 96 x 64 full-colour OLED | none on badge (status LED); backlit LCD on reader |
| Battery (differs) | internal NiMH 800 mAh; about 10 h charge (manual also states about 6 h) | internal NiMH, about 3 h charge; reader 2 x AA or USB |
| Battery life (differs) | 55 h | 20 h |
| Weight (differs) | 117 g | 45 g |
| Dimensions (mm) (differs) | 85 x 54 x 55 | height 38, base diameter 47, microphone apex diameter 13 |
| IP rating (differs) | IP65 (with permeable air vent) | — |
| Operating temperature (°C) (differs) | 0 to 40 (for IEC 61252 compliance); -10 to 50 within 0.8 dB | -10 to 50 |
| Connectivity and software | ||
| Connectivity (differs) | Bluetooth 4.0 Low Energy | infrared to reader, USB 2.0 (reader to PC) |
| Remote control (differs) | Airwave app (Android) | — |
| Software (differs) | Casella Insight, Airwave | AnalyzerPlus |
The instruments on their own
- dBadge2 — full record, sources and owner reviews
- NoiseBadge (Model 22) — full record, sources and owner reviews
Other comparisons
Want a different combination, or more than two at once? Build your own comparison from any instruments of the same type.