Skip to content
soundlevelmeter.review

TES-52AA vs Quest Sound Detector SD-200

Every specification TES Electrical Electronic and TSI Quest publish for these two instruments, side by side. Rows where the values differ are tinted. A blank cell means that manufacturer does not publish the figure, which is itself worth knowing. Nothing here is written by either manufacturer.

Side-by-side specifications. Rows where the instruments differ have a tinted background.
SpecificationTES-52AATES Electrical ElectronicQuest Sound Detector SD-200TSI Quest
StatusCurrentCurrent
Verified on
Standards and class
IEC 61672-1 classClass 2Class 2
Standards (differs)IEC 61672-1:2013 class 2, ANSI S1.4:1983 type 2IEC 61672-1:2002 class 2, ANSI S1.4-1983 (R2006), ANSI S1.43-1997 (R2007), IEC 61010-1:2010
Measurement
Channels11
Measurement range (differs)26-130 dB45 to 130 dB (linearity/dynamic range)
Linearity range (differs)60 dB45 to 130 dB
Frequency range (differs)31.5 Hz to 8 kHz—
Frequency weightingsA, CA, C
Time weightingsF, SF, S
Parameters (differs)Sound level, Maximum, Minimum, PeakSPL, Leq/Lavg
Exchange rates (differs)—3 dB, 5 dB
Analysis
Octave bandsNoneNone
Reverberation time (differs)—No
Building acoustics (differs)—No
Audio recording (differs)—No
Logging and data
Memory (differs)99 sets (manual)—
Hardware
Microphone (differs)1/2" electret condenser1/2" omnidirectional electret condenser, Class/Type 2
Display (differs)4 digit LCD with bar graphDigits 2 cm high, 0.1 dB resolution, 0.5 s update
Battery (differs)9 V (006P / 6F22)Lithium polymer 1000 mAh rechargeable, USB charged
Battery life (differs)10 h50 h
Weight (differs)260 g125 g
Dimensions (mm) (differs)264 x 68 x 27165 x 61 x 23
Operating temperature (°C) (differs)-10 to 500 to 40
Connectivity and software
Connectivity (differs)AC output, DC outputUSB (charging)

The instruments on their own

Want a different combination, or more than two at once? Build your own comparison from any instruments of the same type.